Pyramid 5000+ Betriebsanweisung PDF herunterladen (Seite 15)

AUTO TOTALING TIME CLOCK INSTRUCTIONS

Model 5000

/5000

pyramidtimesystems.com

CLEANING TIME CLOCK

Unlock & remove time clock cover.

Use canned air to blow out debris from

time card slot, paying close attention to

the sensor area on left hand side of card

slot.

Using cloth, wipe down ribbon carriage

rod then disperse a few drops of oil on

rod.

Remove ribbon cartridge from time clock

& use foam applicator dampened with

rubbing alcohol to clean the exposed

print head.

With ribbon removed, run a time card

through the clock 10-15 times. This

procedure will remove any ink build up

from the print head. If there is no ink on

the time card, add a little more alcohol.

The print should start to darken, & then

lighten up as you continue to run the

card through the clock.

Reinstall ribbon, replace & lock time

clock cover.

o Maintain Peak Performance

o Prolong Life of Time Clock

o Every 6 months (Office Environment)

o As required (HD Environment-workplace with high dust/dirt/debris)

o Incomplete or Light Printing

o Can of Compressed Air

o Rubbing Alcohol

o Foam Applicator

o Non-penetrating Oil (such as 3-in-1 oil)

o Clean, Dry Cloth

WHEN TO CLEAN

WHAT TO CLEAN WITH

HOW TO CLEAN

CLEANING & CARE 13

Card Slot

Sensor Area

Print Head

Ribbon Carriage Rod

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Pyramid 5000+ Betriebsanweisung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wanduhren Pyramid 5000+