Pyramid DC Receiver Installationshandbuch PDF herunterladen (Seite 17)

Page 17

Installation Manual Pyramid DC Receiver

SETTING RECEIVER CONFIGURATION WITH THE MK1 KEYBOARD

The Pyramid Mk1 Keyboard can also be used to specify the receiver configuration. Follow the steps below:

1. Log on using an installers card (Use Fn 100 if the receiver is not connected to a matrix).

2. Select a valid monitor, and then enter the number of the receiver that is to be configured.

3. Press the List Up key twice to select Change Rx Config.

4. Select the Yes soft key.

5. The LCD displays the message Rx has feedback pots. Press the Yes or No soft key to indicate whether the receiver

is connected to feedback potentiometers.

6. To determine whether the receiver is connected to a continuous rotation head, the LCD displays the message Rx is

cont rotate head. Press the Yes or No soft key.

7. The LCD displays the message Rx has 3 wire lens Press the Yes or No soft key to indicate whether the receiver is

using a 3-wire lens.

The receiver has now been configured, and the keyboard will return to the initial display.

CAUTION

If the Pan/Tilt head connected to the receiver is not fitted with potentiometers, the feedback pots function must be

disabled at step 5. If this is not done, the pan and tilt operations will only work in one direction. If a Pan/ Tilt head is

fitted with potentiometers, ensure that mechanical limit stops are set, and then press the test button on the receiver

PCB. This will ensure that the potentiometer directions are learnt correctly.

RECEIVER PROGRAMMING

The Pyramid 2 Keyboard can also be used to carry out more advanced receiver programming (e.g., presets, privacy

zones, limit stops, random patrols). For more details on how to do this, see the Pyramid 2 Keyboard Operating Manual.

A copy of the manual is supplied with the Pyramid 2 Keyboard, and can also obtained from the Baxall website at

www.baxall.com, or from Baxall Technical Support.

Basic receiver programming can also be achieved using the Mk1 Keyboard. Instructions on how to do this can be

obtained from Baxall.

1 2 ... 12 13 14 15 16 17 18 19 20

Keine Kommentare

Pyramid DC Receiver Installationshandbuch Seite 17