Pyramid Ac receiver Installationshandbuch PDF herunterladen (Seite 8)

Page 8

Pyramid AC Receiver Installation Manual

CONNECTING THE LENS DRIVE OUTPUTS

CON3 provides the lens drive outputs for focus, iris and zoom. The drive voltage is +10V DC at up to 100 mA. Refer to your

lens instructions and connect up the lens according to Figure 5.

CON6

CON3

ANTI-TAMPER

SWITCH

IRIS -

FOCUS

ZOOM -

IRIS +

FOCUS

ZOOM +

Figure 5 - CON3 Connections

CONNECTING THE PAN/TILT HEAD AND AUXILIARIES

CON4 contains the power output connections for the Pan/Tilt head and auxiliaries (AUX 1, AUX 2, AUX 3 and AUX 4).

Referring to Figure 6, connect LEFT, RIGHT, UP and DOWN to the Pan/Tilt head and AUX 1 to wash, AUX 2 to wipe, AUX

3 to lamps and AUX 4 to camera power. Do not connect any unused auxiliaries. Connect all the return (neutral) wires to

the spare terminals on the external terminal block. Make a note on your module description sheet of your auxiliary

connections.

CAUTION

Maximum current is 1A per relay. Connect lamps using a separate relay as they can draw a surge current when they

fail. This may cause damage to the AC receiver.

CON4

CON

OWN

LEFT

IGHT

AUX 1

AUX 2

AUX 3

AUX 4

Figure 6 - CON4 Connections

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Keine Kommentare

Pyramid Ac receiver Installationshandbuch Seite 8